Instruction manual

Users Manual CX
20
Appendix
SNMPSNMP
SNMPSNMP
SNMP
CD-ROM SetUP Telnet Web Page
Authentic
Community
Authentic
Community
"Public" Setup SNMP authentic community name. This
community name is authenticated when receiving SNMP
Trap Community Trap Community "Public" Enter TRAP community name. This name will be used
when PRICOM execute trap.
Trap Address
(IP)
Trap Address
(IP)
0.0.0.0 Enter the TRAP address. The TRAP address is disabled
if the IP address is set 0.0.0.0.
SysContact SysContact "" Enter SysContact for MIB-II object. Normally enter
administrator’s mail address.
SysName SysName "" Enter SysName for MIB-II object. Normally enter
PRICOM’s host name or domain name.
SysLocation SysLocation "" Enter SysLocation for MIB-II object. Normally enter
location where PRICOM is located.
EnableAuthenTr
ap
EnableAuthenTr
ap
2 Enable or disable authen trap for MIB-II. When
enabled, in occurrence of community error, a SNMP
trap will be sent to the address set at “Trap Address”.
Factory DefaultName Explanation