Instruction manual

Users Manual CX

Appendix

Configuration Report

You can print the configuration test page when the PRICOM is turned on while connected to the printers

that carry their own fonts.

Configuration Report (In case of PRICOM C-5100)

PRICOM C-5100 Version 2.0.0

<< Configure General >>

Change root Password :""

Use HP JetAdmin :Yes

LAN Interface :AUTO

<< Configure TCP/IP >>

TCP/IP Protocol :ENABLE

DHCP/BOOTP :DISABLE

RARP :DISABLE

IP Address :192.168.100.200

Subnet Mask :255.255.255.0

Default Gateway :192.168.100.254

<< Configure SNMP >>

Authentic Community :"******"

Trap Community :"public"

Trap Address(IP) :0.0.0.0

SysContact :""

SysName :""

SysLocation :""

EnableAuthenTrap :2