Instruction manual

Users Manual CX

Appendix

3. Add check on

Create a new portCreate a new port

Create a new port in

Select a Printer PortSelect a Printer Port

Select a Printer Port and create a

new port. Select

LPR PortLPR Port

LPR Port and click

NextNext

Next.

If the destination print port was

created when installing PRICOM,

select the port from

Use theUse the

Use the

following portfollowing port

following port and click

NextNext

Next.

4.At

Name or address of serverName or address of server

Name or address of server

providing lpdproviding lpd

providing lpd, type in the IP address

which was set to PRICOM. At

Name of printer or print queue onName of printer or print queue on

Name of printer or print queue on

that serverthat server

that server, add

lplp

lp and click

OKOK

OK.

5. At

Add Printer WizardAdd Printer Wizard

Add Printer Wizard, select the

printer driver to be used. Click

NextNext

Next.

6. When

Use Existing DriverUse Existing Driver

Use Existing Driver appears,

select whether to keep the existing

driver or replace to a new driver.

NOTE