Instruction manual

Users Manual CX
3
Appendix
7. When
Use Existing DriverUse Existing Driver
Use Existing DriverUse Existing Driver
Use Existing Driver appears,
select whether to keep the existing
driver or replace to a new driver.
8. At
Printer namePrinter name
Printer namePrinter name
Printer name, type the printer
name to be used in Windows NT 4.0.
If necessary, type name of choice.
Select to use this printer as the
default printer or not, then click
NextNext
NextNext
Next.
9.Select
Shared Shared
Shared Shared
Shared or
Not sharedNot shared
Not sharedNot shared
Not shared
according to your environment on
the
Printer SharingPrinter Sharing
Printer SharingPrinter Sharing
Printer Sharing. If the printer
is shared, type a share name. Click
NextNext
NextNext
Next.
10.At the
Print a test pagePrint a test page
Print a test pagePrint a test page
Print a test page, put check
in
YesYes
YesYes
Yes, and click on
FinishFinish
FinishFinish
Finish. The new
printer will be added to the list. If
the test print is correct, the printer
setup is complete.