Instruction manual

5-5
Questions & Answers
Users Manual CX
The Status Monitor is not available
-The Status Monitor may not be available depending on the driver version you are using.
Download the latest driver to use the status monitor.
-Some of the printer does not support the Status Monitor. Please refer to our homepage
for the supported printers.
-The Status Monitor may not properly function if you execute it manually by going to the
properties of the printer. Set the Status Monitor to execute automatically (pop up at
the time of the start of printing).
If you are using PRICOM in Windows 95/98/Me:
-Be sure that the printer port name is set as "LPTx: (where x is the name of your choice)".
If you use name other than "LPTx:" the Status Monitor will not function properly.
If you are using PRICOM in Windows NT 4.0:
-The Status Monitor may not be available depending on your printer driver version.