Instruction manual

5-3
Questions & Answers
Users Manual CX
If you are using PRICOM in Windows NT 4.0, following is a concern.
-If you are using Canon printer driver version 4.2x or earlier, make sure that the PRICOM-
Print CX printing port name is xxx0: to xxx3 (xxx is the three characters of your choice).
Example:
ABC1: or XYZ3:
-If you are using Canon printer driver version 4.3x, do not type in any characters of your
choice. This may cause problem with printing. In this case, do not change the port
name and use the default port name.
The dial-up starts when print job is executed
This problem is caused by the OS you are using and can not be avoided. Click on "Cancel"
to close the dial-up window. The print job should be executed properly.
Error during printing
If you try to print while other users are printing large data (e.g. many pages or color
pages with high resolution), the printer is unable to accept your print job until the ongoing
printing is finished. If the waiting time of your print job exceeds a certain limit, a time
out situation occurs, which causes the error message. In such situation, execute the
print job again afterwards.
LPR printing is not available with PRICOM
With some of the Canon Bubble Jet Printers, the LPR printing is not available. For
more details, check our homepage.
IPP printing is not available with PRICOM C-5100/C-6100U
-With some of the Canon Bubble Jet Printers, the LPR printing is not available. For
more details, check our homepage.
-PRICOM C-700 does not support IPP printing.