Instruction manual

Users Manual CX
3-5
Using PRICOM in a Windows Environment
5. If you want to print using TCP/IP,
select "Use TCP/IP Protocol" and
click
Next.Next.
Next.Next.
Next.
-When you selected "Use TCP/IP
Protocol"...
--In an environment with DHCP
server
Select "Obtain an IP address
automatically" to automatically
assign the IP address.
--In an environment without DHCP
server
Select "Assign an IP address" and
input the IP address manually.
-When you deactivated the
checkbox
"Use TCP/IP Protocol"
--It is not necessary to assign an IP
address.
If the message on the right is
displayed, the IP address MUST be
assigned manually. This message
appears, if any of the following
conditions are fulfilled.
1. A product, that was not in the list,
was selected by manually typing
in the Ethernet address.
2. No IPX/SPX compatible protocol
is installed on your computer and
the IP address is set to 0.0.0.0 (an
environment without DHCP
server).
NOTE
NOTE