Instruction manual

2-19About PRICOM
Users Manual CX
Connection to the Network
-If you have already used PRICOM C-6100U on another network, initialize PRICOM
C-6100U to factory default. You can initialize PRICOM C-6100U from PRICOM User
Software CX. For further information, refer to Chapter 3 of this on-line manual.
-PRICOM C-6100U can not be used with USB HUB.
-If you are using PRICOM C-6100U in a 100BASE-TX environment, prepare 100BASE
Ethernet HUB and network cable (Category 5).
Prepare the following items.
1. Connect the network cable to the
network port of PRICOM C-6100U
and connect the other end of the
network cable to the Ethernet HUB.
2. Connect the AC adapter to PRICOM
C-6100U, then connect the power
cable to the printer.
Ethernet HUB
Network Cable
USB Cable
TIP
Hardware Installation