User's Manual

Drawing No.：JW204430XX
Date：July 13, 2017
(22/27)
CONFIDENTIAL
© silex technology, Inc.
7. System requirements and quick start guide
1) System requirements
Prepare the host CPU board whose spec requirements are shown below.
System pecifications
Items
Descriptions
MCU (CPU)
ARM based 1.0GHz or greater SoC from any companies.
Eg. Freescale i.MX6SX – 1200MHz
Memory size
ROM : 512MB, RAM : 1GB or greater
OS
Linux any kernel distribution
Host interface
SDIO 3.0 / UART
2) Solder down SX-SDMAC-2832 on the CPU board. See “system block diagram”.
3) Connect the Antenna to the SX-SDAMC-2832S. See “Antenna location”.
4) Install the driver which is provided by Silex to the CPU board.
Any other 3rd party’s software shall be rejected due to Subsystem ID mismatch.
5) Set wireless setting via serial console and connect to the AP.
System block diagram
SX-SDMAC-2832S
SX-SDMAC-2832S+
CPU board