Product specifications

Table 40 TCP/IP Commands
Command
Description
SET IP RANge
Allows or prevents access to a range of remote addresses
The default value is empty list.
Format:
SET IP RANge [EN | DI | ALL] aa.bb.cc.dd {MAx
ee.ff.gg.hh]
SH IP ACcess
Displays current access list settings
Sample output:
All hosts permitted access
SET IP ADdress
Sets server IP address
The default value is 192.0.0.192
Format:
SET IP ADdress aa.bb.cc.dd
SET IP BAnner
Enables or disables printing of job banner on LPD jobs
The default value is Disable.
Format:
SET IP BAnner [ENable | DIsable]
SET IP FTIme
Sets IP timeout
If enabled, the IP timeout is measured in seconds. If disable, the IP timeout is in
minutes.
The default value is Disable.
Format:
SET IP FTIme [ENable | DIsable]
SET IP FTP
Enables or disables FTP protocol
The default value is Enable.
Format:
SET IP FTP [ENable | DIsable]
SET IP HTTP
Enables or disables HTTP protocol
The default value is Enable.
Format:
SET IP HTTP [ENable | DIsable]
SET IP
KEepalive*
Sets interval in minutes for sending TCP keepalive packets on a connection
The default value is 5 minutes.
Format:
SET IP KEepalive n
SET IP LPD
Enables or disables the LPD protocol
The default value is Enable.
Format:
SET IP LPD [ENable | DIsable]