Product specifications

Table 38 SNMP Commands
Command
Description
SETCOMM1*
The default value is internal?
Format:
SET SNMP SETCOMM1 <string>
SET SNMP
SETCOMM2*
Sets community 2 name
The default value is Pass.
Format:
SET SNMP SETCOMM2 <string>
SET SNMP CONtact
Sets system contact string
The default value is null.
Format:
SET SNMP CONtact <string>
SET SNMP LOCation
Sets system location string
The default value is null.
Format:
SET SNMP LOCation <string>
SH SNMP
Shows state of SNMP protocol enable
Sample output:
SNMP is Enabled
*Not implemented in early releases of SX-560 firmware.
String Commands
Table 39 String Commands
Command
Description
SET STRing
Set service string table entry
String 1 to11 cannot be set or changed.
Format:
SET STRing <string #> ”value”
CL STRing
Clears the service string table entry
Format:
CL STRing <string #>