Product specifications

Table 37 Service Commands
Command
Description
Format:
SET SERVI <service name> POrt <portname>
SET SERVI <service
name> PRIority
Sets priority for service for multiple service transmissions simultaneously
The default value is 10.
Format:
SET SERVI <service name> PRIority nn
SH SERVI PRI
[service_num]
Shows priority of service.
If service_num is not provided, the priority of all services is listed.
SET SERVI <service
name> RECeive
Sets receive only mode for a service
This option is required only for host applications that do not operate properly if
data is received from the serial device.
The default value is disabled.
Sample output:
SET SERVI <service name> RECeive [ENable |
DIsable]
SET SERVI <service
name> TCP
Sets raw TCP port for service
If port number is 0, raw TCP is disabled on service.
The default value is 9100 for service 1, 3001 for service 2.
Format:
SET SERVI <service name> TCP nn
SH SERVI SUMmary
[service_num]
Shows the basic parameters for a specific service. If service_num is not
provided, parameters for all services are displayed.
The command SH SERVI displays the same data as SHOW SERVI SUM.
SNMP Commands
Table 38 SNMP Commands
Command
Description
SET SNMP GETCOMM*
Gets community name
The default value is public.
Format:
SET SNMP GETCOMM <string>
SET SNMP JETADmin
Enables or disables JetAdmin compatibility
The default value is enabled.
Format:
SET SNMP JETADmin [ ENable | DIsable]
SET SNMP
Sets community 1 name