Product specifications

52
To configure the SNMP server settings:
 Log into the SX-560 internal web pages using a standard web browser. Click Server Settings to
access the screen shown in Figure 10. You can then enter the relevant SNMP information for your
network.
Figure 17 SNMP Configuration
 Click the Submit button to save the changes. You must then restart the SX-560 to make the
changes take effect.
Configuring the General Purpose I/O (GPIO) Lines
The SX-560 module has eight General Purpose I/O (GPIO) lines available for use on connector J7.
These GPIO lines are individually programmable for input, output, or special purpose. By default, six of
the GPIO lines are configured for special purpose use.
Lines configured for input can be used as a source for SNMP traps. The GPIO direction, trigger settings,
and web page message strings are configured from the Internal Configuration Console interface.
through 26 describe the GPIO Commands.