Product specifications

Parameter

Description

Settings

Default Setting

Eclport

ECable destination local IP port

number (required for E-Cable UDP

mode only)

Set by user

N/A

Ectmmsec

Cable connection time resolution

Enable, Disable

Disable

Ecudp

ECable UDP mode

Enable, Disable

Disable

Restoring Factory Default Settings

The factory default settings can be restored at any time. If you are using the SX-560 Evaluation

Daughtercard, hold down the test button for more than five seconds. If you are not using the evaluation

board, short GPIO7 on the OEM header to ground (4.7 K-ohm pull-up resistor connected to +3.3VDC) for

more than five seconds.

Modifying TCP/IP Settings

You can modify the TCP/IP settings using ExtendView, the web browser interface or the SX-560 module’s

internal configuration console.

To modify TCP/IP settings:

1. Using ExtendView, click the TCP/IP tab. The TCP/IP window displays.

Figure 14 TCP/IP Window