Product specifications

47
Chapter 6
Advanced Configuration
The SX-560 module is equipped with a default configuration that works with most serial-to-Ethernet
connections. You can modify the settings to suit your installation requirements.
The web browser interface is the recommended method for setting advanced configuration parameters
(some of the advanced configuration parameters are not accessible via ExtendView). However,
regardless of the method to access the configuration parameters, the method for modifying the
parameters is virtually identical.
Factory Default Settings
Error! Reference source not found. displays the configuration parameter descriptions and settings with
the default settings indicated in a separate column.
Table 17 Factory Default Settings
Parameter
Description
Settings
Default Setting
Character
Bits per character
7, 8
8
Flow
Flow control
None, Xon, Xoff,
CTS/RTS
None
Parity
Parity
None, Even, Odd,
Mark, Space
None
Speed
Baud rate of bits per second
300, 600,1200, 2400,
3600, 4800, 7200,
9600, 14400,19200,
38400, 57600, 76800,
115200, 230400,
460800, 921600
115200
Stop
Stop bits per character
1, 2
1
Mode
Line mode or serial port protocol
232, Disabled
232
Ecable
ECable mode for TCP connections
Enable, Disable
Disable
Ecaddr
ECable destination IP address
Set by user
N/A
Econn
ECable connection attempt time
1-255 seconds
30 seconds
Ecport
ECable destination TCP port number
Set by user
N/A