User's Manual

User’s Guide
Document #40171-120 Rev. AX1 5
Windows
™
System Requirements
To configure the settings of the PocketPro USB print server (wired and
wireless versions) using the provided ExtendView Utility in Windows,
your Windows-based system should include the following components:
 A PC with a 133 MHz or higher processor
 Microsoft Windows 98SE, ME, 2000, or XP operating system
 At least 64 MB of RAM (memory)
 At least 3 MB of free hard disk space to install the software
 A CD-ROM drive (to load the software)
 A PC equipped with a USB version 1.1 or 2.0 port connector
 An Internet connection through a cable or DSL modem, or an
external dial-up or ISDN modem (for online product registration)
Macintosh System Requirements
Macintosh users can access the configuration settings for the PocketPro
USB print server through a standard web browser using the DHCP
dynamic IP address or the default static IP address of the print server
(192.0.0.192).
Network Protocols Supported
 TCP/IP
 TELNET
 WINS
 DHCP
 AppleTalk
 IPX/SPX
 Net Beui