User guide

IP Communicator Series Installation Document — P/N 53109:I 4/26/2010 19
NOTE: When using a 411, AC Loss is reported from the FACP Trouble Relay output to the 411 Trouble Input.
The 411 does not have a 4th Input Channel. The 411 does allow any of the three Input Channels to be
programmed to report AC loss if desired.
RJ45
Ethernet/
Internet
Connection
Communicator
Fault to monitor
module on
FACP SLC
Loop
To Alarm,
Trouble,
Supervisory
Output Relays
on FACP
(2.2KΩ ELRs at
FACP)
Figure 19 Wiring IPDACT-2 or IPDACT-2UD to 411/411UD and HP300ULX
IPDACT-2UDHP300ULXto411UD2.wmf