Instruction Manual
Programming
150805 25
16
Dialer
Menu
COMPUTER ENABLE Yes = Downloading computer used.
No = Downloading computer NOT used.
Yes (D)
No
17
Dialer
Menu
TOUCHTONE # 1 Yes = Phone #1 will try both TouchTone and rotary.
No = Phone #1 will use rotary dialing only.
Yes
No (D)
18
Dialer
Menu
LINE 1 PREFIX Up to eight digits. See section 5.2.1 for information on using special
characters for pauses, *, etc.
________________
Default = None
19
Dialer
Menu
TOUCHTONE # 2 Yes = Phone #2 will try both TouchTone and rotary.
No = Phone #2 will use rotary dialing only.
Yes
No (D)
20
Dialer
Menu
LINE 2 PREFIX Up to eight digits. See section 5.2.1 for information on using special
characters for pauses, *, etc.
________________
Default = None
21
Dialer
Menu
MUST REPORT #1 Yes = Reports must always be sent to central station phone #1.
No = If another phone number is available first, no report to phone #1.
Note: If must report is selected for #1 or #2 then the event will report to
that account.
Yes (D )
No
22
Dialer
Menu
MUST REPORT #2 Yes = Reports must always be sent to central station phone #2.
No = If another phone number is available first, no report to phone #1.
Note: If must report is selected for #1 or #2 then the event will report to
that account.
Yes (D )
No
23
Dialer
Menu
AC ACTIVATION 0 = Active high
1 = Active low
2 = AC Monitored
Active high
Active low
Monitor AC (D)
Table 5-2: Programming Form
Step # /
From
Menu
Option Description
Your Choice
(D) = Default