Instruction Manual

Model 5128/29 Fire Slave Communicator Installation Manual
14 150805
3.7.3 Monitor AC (Available with the Model 5129 only)
The 5128/29 can perform direct AC monitoring of the fire control panel’s 120 VAC power input. The wires
attached to the 5129 board can be connected directly to the AC as shown in Figure 3-7 below. Make sure you
do not attach the low AC channel input here.
Figure 3-7 Direct AC Input
Note: Refer to installation instructions for the fire alarm control panel to determine this interface is compatible with the
unit.
Supervised
Connections must be made
in a separate electrical box