User Guide

60
CHANGE AN ACCESS CODE
1. Press 7 TEST .
2. Select Yes or No for Bulk Load.
3. Enter # of user you want to change (2-999).
4. Press CLR + New access code + TEST
5. Press MUTE MUTE
DELETE AN ACCESS CODE
1. Press 7 TEST .
2. Select Yes or No for Bulk Load.
3. Enter # of user you want to change (2-999).
4. Press CLR TEST
5. Press MUTE MUTE
INTERCOM USEBASIC 2-WAY
OPERATION
To enable all intercoms, press ICOM .
To enable one intercom, press number of intercom (1-
15) + ICOM .
RESET ALARM Access code
SET DATE
8 TEST + DATE (using MM/DD/YY format with
leading 0's) + TEST
SET TIME
9 TEST + # for AM/PM
+ TIME (using HH/MM format with leading 0's) +
TEST