User Guide

4 4734user.doc
Exit/Entry Delay Zones
The exit delay gives you time to leave the building after
arming the system. Your system may be programmed to
beep during the delay period.
If a delayed zone is still active (that is, if someone is still
in the zone) at the moment the exit delay elapses, it will
cause an immediate alarm.
The entry delay gives you time to disarm the system after
entering the building. A beep will sound during the delay
period.
If the NO DELAY light is on, all delays are ignored. If
anyone enters a zone while the system is armed, an alarm
will sound immediately.
Chime Zones
When the system is disarmed, chime zones emit a warning
sound whenever anyone enters them.
Multi-area System
The 4734 can divide your premises into up to 8 "areas," or
groups of zones, that can be armed and disarmed
independently. Special menus display on the touchpad
allowing you to control your system easily. See section
3.3 for information on how to control a multi-area system.
If you and your installer have decided to set up a multi-
area system, your installer will create the areas for you.
You can control who has access to each area. See
programming access rights section (section 4.11) for more
information.
Instructions for operating a multi-area system are found
throughout this guide.
Auto-arming System
Your system can be programmed to arm or disarm
automatically at specified times.