User Guide

38
EXAMPLE:
To program Monday through Friday, press 1 2 3 4
5 . When you've finished selecting days for this time
window, press TEST .
Assigning Days
Digit Day
0 Sunday
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Holiday
Cards/Codes (Menu 1)
This menu allows you to program user codes and select
"profiles" for each user. Profiles determine which
system features each user will have access to. Your
installer will tell you what access rights each profile has.
Follow the steps below to add new user codes and assign
user profiles to the new codes.
1. You must be in programming mode. If necessary,
press 1 1 TEST + your main access code.
2. Press 1 TEST to go to the cards/codes menu.
(Note that from here on, you are performing the
same procedure as described in section 3.19.)
"BULK LOAD? YES/NO"
3. If you are programming cards or codes cards for
users who will have the same user profile, select
"Yes" here. "No" means that you will continue to
select the profile each code or card individually.