User Guide

24
Viewing System Information
STAT lets you find out which zones are not ready to be
armed. If your LCD indicates "NOT READY" or
"TROUBLE" when you attempt to arm the system, press
STAT to see the affected zones.
If you're using the area menu, STAT gives the status of
the area you are currently attempting to arm. To see
additional areas to which you have access, press TEST
to skip to the areas you wish to view, then press STAT .
STAT , in combination with other keys, allows you to
view other system information.
1 STAT displays all the zone numbers and names in
the areas controlled by the touchpad you are currently
using.
2 STAT displays the number and location of the
touchpad you are currently using.
4 STAT displays the installed version of the 4734
software.
Resetting an Alarm
To reset an alarm in a single-area system, enter your
access code. In a multi-area system, enter your access
code, then 0 . The alarm will stop sounding and the
system will disarm.
Silencing (Muting) a Trouble Condition
To silence a trouble condition alert tone, press
MUTE MUTE . The touchpad will now display
"SILENCED" instead of "TROUBLE." If a new trouble
condition should occur in the meantime, "TROUBLE"
will again display and the alert tone will be reactivated.
In a multi-area system, enter your access code before
pressing MUTE MUTE . Each area must be silenced
separately.
Viewing Alarm Memory