User Guide

1. Enter the number of the zone to bypass.

2. Press BYPS .

3. If your system is programmed to require an access

code, the LCD will display the number of the zone

you are attempting to bypass and will prompt you to

enter the access code. If, for example, you are

attempting to bypass zone 5, the touchpad will

display "5-ENTER CODE."

4. If you were successful, the touchpad will display

"BYPASSED."

5. If the touchpad displays "RESTRICTED ZONE,"

you have attempted to bypass a fire or panic zone.

These zones cannot be bypassed.

6. To view zones that have been bypassed, press

BYPS . The numbers and locations of zones that

have been bypassed will display. If the system is

armed when you attempt to find out which zones

have been bypassed, you must enter your access

code. In this case, after you press BYPS , the

touchpad will display "ENTER CODE."