User Guide

11 4734user.doc
OFF - Chime feature disabled. (If the system is armed,
an alarm, not a chime tone, sounds when anyone enters
the zone.)
FLASHING - Some, but not all, areas controlled by this
touchpad have the chime feature enabled.
Touchpad Function Buttons
Some keys, when used for multi-area operation or programming, have
different functions than those described here. Their alternate functions are
described in the appropriate sections.
INT
Turns the interior feature on and off.
DLY
Turns the No Delay feature on and off, which
makes delayed zones respond instantly.
DOOR
Use to allow entry to controlled areas.
0 - 9
Digit buttons. Use for entering numerical
information such as access codes.
STAT
Displays zones that are not ready or are in
trouble, and other system troubles. (If
troubles exist, they display first when you
press STAT , then not ready zones.)
BYPS
Bypasses (deactivates) individual zones or
doors so that they will not be monitored.
Also displays zones and doors that have been
bypassed.
MEM
Displays zones that were in an alarm
condition since the last time the system was
armed.
CODE 2
Enables the code 2 feature.
MUTE
Silences an audible trouble signal. You must
always press this key twice.
CHM
Turns the chime feature on and off.