Specifications

Model 9800 Central Station Receiver Installation/Operation Manual
5-14 151018
5.4.3.1 How to Set Up Port Function
Port functions set up how each of the communication ports will be used. Before you start to
set up the port functions review the rules for port functions in Table 5-4.
1. Enter program mode. (See Section 5.1.)
2. Press for General Options.
3. Press for Communications.
4. Press to set port functions.
5. Press or until the display flashes on the desired port setting.
6. Press .
7. Repeat steps 5 through 6 until all port functions are set.
8. Press to exit menu.
Communications
(cont.)
Annunciator
Configuration
Printer
Yes or N o
Yes = will annunciate if an event,
trouble or fault condition occurs.
No = no annunciation if an event,
trouble or fault condition occurs.
Default for all options: Yes.
See Section 5.4.3.6.
* Listen In option must be set to No
for UL installations.
Bkp Printer
Auto Comp
Bkp Auto Comp
Battery
Device
Line Fault
AC Power
Buffer Full
Listen In*
Call Pending
Aux Relay Cfg
Options the same as Annunciator Configuration.
See Section 5.4.3.7.
* Listen In option must be set to No for UL installations.
General
Options
Items
Level 1 Choices Level 2 Choices Level 3 Choices Comments