Specifications

Model 9800 Central Station Receiver Installation/Operation Manual
5-10 151018
5.4.2.5 How to Edit ITI Options
If one of the following ITI options is turned on (set to Yes) then the LCD and printer outputs
will include that information.
• Attempts
•CPU Time
• CPU Type
•Panel Rev
• Arming Level
To set these Display Options follow these steps:
1. Enter program mode. (See Section 5.1.)
2. Press for General Options.
3. Press for Display Options.
4. Press until the display flashes on the <ITI> savings field.
5. Press .
6. Press or until the equal sign is on the desired option.
7. Press to change the setting of that option.
Note: Additional presses of the enter button will toggle the setting between Yes and No.
8. Repeat steps 6 and 7 for any other ITI display options you wish to edit.