Specifications

Installation
151018 3-17
3.10 Battery Connection
To install the 6712 backup battery follow these steps:
Note: The 6712 (12VDC 7ah battery) will provide a minimum of 4 hours of battery backup power. (See 3.9.2 for
UL requirements.)
1. Plug the Battery/Relay wiring harness onto the battery connector on the back of the 9800
receiver. (See Figure 3-13.)
Figure 3-13 Battery Connections
2. Connect the RED terminal to the positive (+) side of the battery.
3. Connect the BLACK terminal to the negative (-) side of the battery.
Note: Incorrect polarity can damage the battery and the 9800.