Specifications

Model 5700 Installation and Operation Manual
7-42 151295
To change an access code:
1. Press or to display the main menu.
2. Enter the installer code if requested.
3. Select for Program Menu.
Display reads: Initializing
Please wait . . .
4. Select for System Options.
Display reads: Select Profile 01
Fire Fighter’s Key
5. Select the access code you wish to edit by pressing the or arrow.
6. Then press .
7.9.1 Profile Edit Menu
From the Profile Edit Menu you can change the users name, access code, and the panel
functions that the user will have access to with their code.
Note: Profile 1 (Fire Fighter’s Key) the user name and access code can not be edited. Profile 2 (Installer) the
user name and panel functions can not be edited.
7.9.1.1 Edit Name
7. Select each character of a word by pressing the or arrow, then press to move to
the next character.
8. Repeat step 7 until user name is complete.
9. Then press to finish.
7.9.1.2 Edit Access Code
10. Enter new access code (minimum of 4 digits, maximum of 7 digit)
11. Press .
12. Enter code again.
13. Press .
7.9.1.3 Panel Functions
14. Press the or arrow to move through the list of available functions.
15. Then press to move to Y (yes) or N (no) selection column.
16. Press the or arrow to select Y or N.
17. Press .
18. Repeat steps 14 through 17 until user profile is complete.
7
8