Specifications

Model 5700 Installation and Operation Manual
7-18 151295
7.4.5 Edit Output Group Templates
Some installations may require that zones be mapped to more than 8 output groups. With
output group templates you can combine one or all output groups into one template, which can
be used when the same combination of outputs are used for several zones.
For example, lets say an installation has five zones (See table below). The check mark
indicates what output groups are mapped to each zone. You will notice that every zone is
mapped to outputs 1 and 2. As an alternative you can create a template that combines output
group 1 and 2 as one choice.
This can be done by creating a template which includes output groups 1 and 2. Then you can
map all the zones to the template you created. This will free up output group assignments that
are common to several zones. This is very useful when you need to map zones to more than
eight output groups.
To create Output Group Templates:
1. From the Main Menu, select for Program Menu.
2. From the Program Menu, select for Group.
3. At the next screen, select for Edit OPG Template.
4. Select the template number (01 - 08).
5. Select output group number. See Figure 7-9.
Figure 7-9 Output Group Template Programming Screen
Zone
Group Number
12345678
1st Floor Smoke Detectors  
2nd Floor Smoke Detectors  
3rd Floor smoke Detectors  
Manual Fire Pull Stations  
Water Flow Switches  
7
3
5
Output
Group #
Yes = Include the selected
output group in this template
No = Do Not include output
group in this template
Select the
Cadence Pattern