SCXMIT10 418Mhz Consolidated Transmitter Series Installation Instructions Revision IR Date 01/12/2016 www.silentcall.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document REVISION HISTORY Revision # Initiated By Revision Date Approved by Approval date. Reason Retain this record in front of this manual. Upon receipt of this revision, insert and remove pages accordingly. Then enter on this page, the revision number, issue date, insertion date, and your initials.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document TABLE OF CONTENTS SECTION 1: INTRODUCTION.................................................................................................................................... 5 1.1 PURPOSE: ...................................................................................................................................................................................5 SECTION 2: SYSTEM DESCRIPTION ............................................
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.16 SM5-MC Operation: ................................................................................................................................................................ 11 3.17 TEL-MC Installation: ................................................................................................................................................................ 12 3.18 TEL-MC Operation: ................................................
SCXMIT10 418Mhz Consolidated Transmitter Installation Document SECTION 1: INTRODUCTION 1.1 PURPOSE: This document contains information relative to the installation and operation characteristics of the Silent Call Medallion Series SCXMIT10 Consolidated Transmitter configurations. SECTION 2: SYSTEM DESCRIPTION 2.1 KEY FEATURES: The Silent Call SCXMIT10Transmitter Medallion Series is a configurable 418Mhz Transmitter to be used in conjunction with the Medallion Series Receivers.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 2.3 REGLATORY INFORMATION NOTICE: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. This Device Complies With Industry Canada License-Exempt Rss Standard(S). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document SECTION 3: CONFIGURED TRANSMITTER INSTRUCTIONS 3.1 BM418-MC INSTALLATION: 1. 2. 3. Place the bed mat under the sheet on the bed in the area of where the users back will lay. Allow the wire and transmitter to hang over the head of the bed so that the user is not lying on either part or does not trip on the wire when getting out of bed. The transmitter is connected to the Bed Mat and must not be mounted directly to a metallic surface.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.5 DB41-MC INSTALLATION: 1. 2. 3. 4. 5. 6. Locate your doorbell chime unit and remove the cover. Inside the chime unit, locate the terminal block with three terminals marked FRONT, REAR and TRANS. Loosen the two screws but do not disconnect the attached wires. Attach the two wires from the DB41-MC as follows: Red to FRONT, yellow to REAR. Tighten the two screws and tuck and excess wires out of sight.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.9 FA3-MC INSTALLATION: Please contact a licensed fire alarm installer for installation and working with this product. Improper installation can damage your fire alarm and/or prevent proper operation of the fire alarm. Technical support is available at (800) 572-5227. The FA3-MC in conjunction with a Silent Call Medallion Series receiver is considered an Supplementary Visible Notification Appliance.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.13 MAT4-MC INSTALLATION: 1. 2. 3. Place the mat where it will be stepped on anywhere except the very edge. The water resistant material used to manufacture the TransMATTer is required to have a protective cover over it; this would usually consist of a door rug or similar covering. The transmitter that is connected to the TransMATTer must not be mounted directly to a metallic surface.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.15 SM5-MC INSTALLATION: Please read all of the instructions thoroughly before using your Sound Monitor. 1. 2. 3. Remove your Sound Monitor from the packaging. Place the Sound Monitor as close to the sound source as possible that you want to monitor (but not within a baby’s reach). For example, place it on a dresser next to a baby’s bed or next to a telephone, alarm clock or apartment doorbell speaker.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.17 TEL-MC INSTALLATION: 1. The telephone transmitter will work with standard telephone lines and with most video phone RJ-45 outputs. 2. To install the TEL-MC telephone transmitter on a conventional telephone line, plug the telephone transmitter into any telephone outlet. Use the supplied dual adapter if you need to connect a telephone AND the transmitter to the same outlet. 3.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document Technical Support For technical support on this or any other Silent Call product, please feel free to contact us. You can reach us by phone at 800572-5227 (voice or TTY) or by Email at support@silentcall.com CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document SCXMIT10 418Mhz Consolidé Émetteur Série Instructions D'Installation Traduction Français TABLE DES MATIÈRES SECTION 1: INTRODUCTION.................................................................................................................................. 16 1.1 OBJECTIF: ......................................................................................................................................................................
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.9 INSTALLATION DE FA3-MC: ....................................................................................................................................................... 20 3.10 FA3-MC OPÉRATION: .............................................................................................................................................................. 20 3.11 INSTALLATION DE FA41-MC: ..................................................
SCXMIT10 418Mhz Consolidated Transmitter Installation Document SECTION 1: INTRODUCTION 1.1 OBJECTIF: Ce document contient des informations relatives à des caractéristiques installation et l'utilisation des configurations de silencieux appeler médaillon série SCXMIT10 Consolidated émetteur. SECTION 2: DESCRIPTION DU SYSTÈME 2.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 2.3 AVIS D'INFORMATION REGLATORY: CET APPAREIL EST CONFORME À LA PARTIE 15 DES RÈGLES FCC. Cet Appareil Est Conforme Avec Industrie Canada Exemptes De Licence RSS Ou Les Normes.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document SECTION 3: INSTRUCTIONS DE L'ÉMETTEUR CONFIGURÉ 3.1 INSTALLATION DE BM418-MC: 1. 2. 3. Placez le tapis sous le drap sur le lit dans la zone d'où les utilisateurs retour déposera. Laissez le fil et l'émetteur à accrocher au-dessus de la tête du lit, afin que l'utilisateur n'est pas couché sur une ou l'autre partie ou ne se déclenche pas sur le fil quand sortir du lit.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.5 INSTALLATION DE DB41-MC: 1. 2. 3. 4. 5. 6. 7. Repérez votre carillon sonnette et enlever le couvercle. À l'intérieur de l'unité de carillon, placer la plaque à bornes avec trois bornes avant, arrière et TRANS. Desserrez les deux vis mais ne pas déconnecter les câbles attachés. Attachez les deux fils de la DB41-MC comme suit : rouge vers l'avant, jaune à l'arrière. Serrer les deux vis et les tuck et les excès fils hors de la vue.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.9 INSTALLATION DE FA3-MC: Pour l'installation et l'utilisation de ce produit, veuillez communiquer avec un installateur d'alarme incendie sous licence. Une installation incorrecte peut endommager votre alarme incendie et/ou empêcher le bon fonctionnement de l'alarme. incendie. Le support technique est disponible au (800) 572-5227.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.13 INSTALLATION DE MAT4-MC: 1. Poser le tapis où il va être piétiné n'importe où sauf au bord. Le matériau résistant à l'eau utilisé pour la fabrication de la transmatter doit avoir un couvercle de protection au-dessus de lui ; cela comprendrait généralement un tapis de porte ou un revêtement semblable. 2. L'émetteur connecté à la transmatter ne doit pas être monté directement sur une surface métallique.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.15 INSTALLATION DE LA SM5-MC: Veuillez lire toutes les instructions attentivement avant d'utiliser votre moniteur de sons. 1. Retirez votre moniteur de sons de l'emballage. 2. Placer le témoin sonore aussi près de la source sonore que possible que vous souhaitez surveiller (mais pas dans la portée d'un bébé).
SCXMIT10 418Mhz Consolidated Transmitter Installation Document 3.17 INSTALLATION DE TÉL-MC: 1. Le transmetteur téléphonique collaborera avec les lignes téléphoniques standard et avec la plupart des produits de vidéo sur téléphone RJ-45. 2. Pour installer le transmetteur téléphonique TEL-MC sur une ligne téléphonique classique, branchez le transmetteur téléphonique dans une prise de téléphone. Utiliser l'adaptateur en double si vous avez besoin de brancher un téléphone et l'émetteur sur la même prise. 3.
SCXMIT10 418Mhz Consolidated Transmitter Installation Document Support Technique Pour le support technique à ce sujet ou tout autre produit d'appel silencieux, s'il vous plaît n'hésitez pas à nous contacter. Vous pouvez nous joindre par téléphone au 800-572-5227 (voix ou TTY), ou par courriel à support@silentcall.com LES CHANGEMENTS OU MODIFICATIONS NON EXPRESSÉMENT APPROUVÉS PAR LE FABRICANT PEUVENT ANNULER AUTORISATION VOTRE D'UTILISER L'ÉQUIPEMENT.