User Manual

Dry Contact Style Transmitters with Batteries
Weather Transmitter
Carbon Monoxide CO3-SS
Door Access / Window Transmitter DW3-SS
Fire Transmitter FA3-SS
TransMATTer MAT-SS
Doorbell Transmitter w/button DB2-SS
Operation
1. The Dry Contact Transmitters will transmit as long as the contact closure is made
maintaining the alert output and will stop transmitting when the alert output goes
back to normal or standby condition.
2. Range is approximately 1500 - 2,000 feet, depending on local conditions.
3. This unit is powered by two AA size alkaline cells. Actual battery life is determined
by the amount of time the transmitter is transmitting and amount of transmissions. In
normal use the batteries may be expected to last several years. However, it is
recommended the batteries be checked once a year.
Weather Transmitter
Carbon Monoxide CO3-SS
Door Access / Window Transmitter DW3-SS
Fire Transmitter FA3-SS
TransMATTer MAT-SS
Doorbell Transmitter w/button DB2-SS
Transmitters without Batteries
Operation
4. The Transmitters without batteries (voltage input) will transmit as long as the input
voltage is present and above approximately 10VDC. If connected to the horn / strobe
line of a fire or security panel, it will transmit as long as the horn is activated or
sounding.
5. When transmitting, the Voltage Input Transmitter will result in the appropriate LED
and ICON indication on the Signature Series Silent Call receiver.
6. Range is approximately 1500 - 2,000 feet, depending on local conditions.
7. The Voltage Input Transmitters are powered by the input voltage and do not require a
battery.
Voltage Input Transmitter
Fire Panel Transmitter FA4-SS
Direct Wired Doorbell Transmitter DB1-SS
Carbon Monoxide Transmitter CO4-SS