User Manual
Setup and Operation: Continued
To exit the Time setup mode press and release the MODE button six times to exit.
To SET ALARM CLOCK TIME:
1. Press and release the MODE pushbutton twice.
2. The Green LED will light indicating that you are in the SET ALARM CLOCK TIME mode. The display will show
the present Alarm Clock Time setting and a BELL ICON indicating that you are in the alarm clock mode.
3. Press and release the MINUTES and HOURS pushbuttons (Two small pushbuttons located at the upper right
hand side of the unit) to adjust the alarm clock time.
4. Once the Alarm Clock Time has been set, press and release the MODE button five times to exit.
5. The third small pushbutton turns the clock alarm on or off by pressing and releasing the button. To turn the
ALARM on, press and release the pushbutton, the BELL ICON will appear indicating that the clock ALARM is now
active.
To Test: Set the Alarm Clock Time one or two minutes ahead of the Time. Turn the Alarm ON, The BELL ICON will
appear. The unit will activate the strobe and optional Vibrator when the alarm time has been reached.
The SET ALARM CLOCK TIME mode will automatically return to the normal operating mode within 20 seconds.
Pressing and releasing the MODE pushbutton 5 times will also return the unit to normal operating mode.
To Cancel an Alarm:
The MODE pushbutton serves two functions. In the mode settings the button selects which item you wish to set.
The buttons normal operation is to serve as a CANCEL ALARM signal button. To cancel an alarm, press and release
the mode button.
6. Once the alarm has ceased, press the MODE button three time or until all the LED’s are off returning to normal
operation. The Sidekick is now programmed to respond to the transmitter signal.