MSDS

ManualsBrandsSikaLatex ManualsBuilding materials1-Gal. Concrete Bonding Adhesive and Acrylic Fortifier

M A T E R I A L S A F E T Y D A T A S H E E T

Page 1 of 4

SikaLatex R

HMIS

HEALTH 1

FLAMMABILITY 1

REACTIVITY 0

PERSONAL PROTECTION B

1. Product And Company Identification

Supplier

Manufacturer

Sika Corporation Sika Corporation

201 Polito Ave 201 Polito Ave

Lyndhurst, NJ 07071 Lyndhurst, NJ 07071

Company Contact: EHS Department Company Contact: EHS Department

Telephone Number: 201-933-8800 Telephone Number: 201-933-8800

FAX Number: 201-933-9379 FAX Number: 201-933-9379

Web Site: www.sikausa.com Web Site: www.sikausa.com

Supplier

Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number

CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300

INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887

Issue Date: 03/18/2004

Product Name: SikaLatex R

CAS Number: Not Established

Chemical Family: Butyl Acrylate/Styrene Copolymer Dispersion

MSDS Number: 3122

Product Code: 0132540

2. Composition/Information On Ingredients

Ingredient CAS Percent Of

Name Number Total Weight

ACRYLIC POLYMER Trade Secret

3. Hazards Identification

Eye

Hazards

May cause eye irritation.

Skin

Hazards

May cause skin irritation.

Ingestion

Hazards

May be harmful if swallowed.

Inhalation

Hazards

May cause nose, throat, and lung irritation.

Summary of content (4 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET SikaLatex R HMIS HEALTH 1 FLAMMABILITY 1 REACTIVITY 0 PERSONAL PROTECTION B 1. Product And Company Identification Supplier Sika Corporation 201 Polito Ave Lyndhurst, NJ 07071 Manufacturer Sika Corporation 201 Polito Ave Lyndhurst, NJ 07071 Company Contact: EHS Department Telephone Number: 201-933-8800 FAX Number: 201-933-9379 Web Site: www.sikausa.com Company Contact: EHS Department Telephone Number: 201-933-8800 FAX Number: 201-933-9379 Web Site: www.sikausa.
PAGE 2
MATERIAL SAFETY DATA SHEET SikaLatex R 4. First Aid Measures Eye In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes. Get medical attention immediately if irritation develops and persists. Skin In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical attention immediately if irritation (redness, rash, blistering) develops and persists.
PAGE 3
MATERIAL SAFETY DATA SHEET SikaLatex R 8. Exposure Controls/Personal Protection - Continued Respiratory Protection A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace conditions warrant a respirator's use. Other/General Protection Wash thoroughly after handling. Ingredient(s) - Exposure Limits ACRYLIC POLYMER OSHA PEL: NOT ESTABLISHED ACGIH TLV: NOT ESTABLISHED IARC: NO NTP: NO 9.
PAGE 4
MATERIAL SAFETY DATA SHEET SikaLatex R 13. Disposal Considerations Dispose in accordance with applicable federal, state and local government regulations. Waste generators must determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. 14.