TDS

Safety Data Sheet
SikaAnchorFix®‐SPartB
Revision Date 02/05/2018 Print Date 02/05/2018
4 / 10
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Store in accordance with local regulations.
Materials to avoid : No data available
8. E
xposure controls/personal protection
Component CAS-No. Basis **
V
alue Exposure limit(s)* /
Form of exposure
Glycerol 56-81-5 OSHA P0 TWA 10 mg/m3
Total
ACGIH TWA 10 mg/m3
dibenzoyl peroxide 94-36-0 ACGIH TWA 5 mg/m3
OSHA Z-1 TWA 5 mg/m3
OSHA P0 TWA 5 mg/m3
*
The above mentioned values are in accordance with the legislation in effect at the date of th
e
rele
ase of this safety data sheet.
**Basis
ACGIH. Threshold Limit Values (TLV)
OSHA P0. Table Z-1, Limit for Air Contaminat (1989 Vacated Values)
OSHA P1. Permissible Exposure Limits (PEL), Table Z-1, Limit for Air Contaminant
OSHA P2. Permissible Exposure Limits (PEL), Table Z-2
OSHA Z3. Table Z-3, Mineral Dust
Engineering measures
: Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use
process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure below any
recommended or statutory limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk
assessment indicates this is necessary.
The filter class for the respirator must be suitable for the
maximum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling
the product. If this concentration is exceeded, self-contained
breathing apparatus must be used.
Hand protection
Remarks : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling