Instructions / Assembly

APPLICATION METHOD / TOOLS
Anchors in solid masonry/concrete
Drilling of hole with an
electric drill to the
diameter and depth
required. Drill hole
diameter must be in
accordance with anchor
size.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole. (at least 2×)
Important: use oil-free
compressors.
The drill hole must be
thoroughly cleaned with
the special steel brush
(brush at least 2×). The
diameter of the brush
must be larger than the
diameter of the drill hole.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole (at least 2×).
Important: use oil-free
compressors.
The drill hole must be
thoroughly cleaned with
the special steel brush
(brush at least 2×). The
diameter of the brush
must be larger than the
diameter of the drill hole.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole (at least 2×).
Important: use oil-free
compressors.
Pump approx. twice until
both parts come out
uniformly. Do not use this
material. Release the gun
pressure and clean the
cartridge opening with a
cloth.
Product Data Sheet
Sika AnchorFix® S
June 2018, Version 01.02
020205010010000003
6 /
8