Instructions / Assembly

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY

Mortar and concrete must be at the required strength.

No need to be 28 days old.

▪

Substrate strength (concrete, masonry, natural stone)

must be verified.

▪

Pull-out tests must be carried out if the substrate

strength is unknown.

▪

The anchor hole must always be clean, dry, free from

oil and grease etc.

▪

Loose particles must be removed from the holes.▪

Threaded rods and rebars have to be cleaned

thoroughly from any oil, grease or any other

substances and particles such as dirt etc.

▪

MIXING

Getting the cartridge ready

1. Unscrew the cap

2. Cut the film

3. Screw on the static

mixer

4. Place the cartridge into

the gun and start

applicatio

Product Data Sheet

Sika AnchorFix® S

June 2018, Version 01.02

020205010010000003

5 /