Product Data Sheet

ManualsBrandsSika ManualsCaulk509227

PRODUCT DATA SHEET

Sikacryl® PowerSet

TWO COMPONENT, POLYESTER BASED GAP FILLER

PRODUCT DESCRIPTION

Sikacryl® PowerSet is a specially formulated two-part

polyester mortar designed to cure quickly for repair of

cementitious and masonry substrates.

USES

Repointing Repairs on Masonry Structures▪

Crack Filling▪

Walkways, Sidewalks, Stairs, Decks, Patios, Walls, etc.▪

Suitable for use as a filler repair material for small gaps

occurring in typical cementitious mortar, concrete, and

masonry substrates

▪

CHARACTERISTICS / ADVANTAGES

Fast Curing▪

Easy to Install▪

Excellent for Minor Repairs to Horizontal or Vertical▪

Convenient Packaging▪

PRODUCT INFORMATION

Packaging

10.1 fl. oz. (299 ml) + 2 static mixing nozzles

Carton containing 6 cartridges with 2 static mixing nozzles per cartridge

Appearance / Color

Mixed: Gray

‘A’ Component: Beige

‘B’ Component: Black

Shelf Life

12 months in original, unopened packaging

Storage Conditions

Cartridges standing upright in cool conditions, between 41 to 77 °F (5 to 25

°C) out of direct sunlight. Condition material to 60 to 75°F (15 to 24 °C) before

using.

Density

0.06 lb./in

(1.7 g/cm

)

(mixed) (ASTM D-1875)

TECHNICAL INFORMATION

Product Data Sheet

Sikacryl® PowerSet

June 2018, Version 01.01

020405020030000013

1 /

Summary of content (4 pages)

PAGE 1
PRODUCT DATA SHEET Sikacryl® PowerSet TWO COMPONENT, POLYESTER BASED GAP FILLER PRODUCT DESCRIPTION CHARACTERISTICS / ADVANTAGES Sikacryl® PowerSet is a specially formulated two-part polyester mortar designed to cure quickly for repair of cementitious and masonry substrates.
PAGE 2
Compressive Strength 4 hours 24 hours 7 days Modulus of Elasticity in Compression 4.54 x 105 psi (3,129 MPa) 7 days (ASTM D-695) Tested at: 73 °F (23 °C) 50 % R.H. Flexural Strength 3,480 psi (24 MPa) 7 days (ASTM D-790) Tested at: 73 °F (23 °C) 50 % R.H. Tensile Strength 1,595 psi (11 MPa) at 24 hours 1,885 psi (13 MPa) at 7 days (ASTM D-638) Tested at: 73 °F (23 °C) 50 % R.H. Elongation at Break 0.09 % at 24 hours 0.12 % at 7 days (ASTM D-638) Tested at: 73 °F (23 °C) 50 % R.H.
PAGE 3
▪ Attach the static mixing nozzle. ▪ Begin dispensing the cartridge’s contents through the static mixing nozzle. Prior to installation, the initial portion of material dispensed from the nozzle is discarded until it can be visually verified that both components are flowing and mixing to a uniform Gray appearance and consistency. ▪ If cartridge is partially used and the remaining contents is to be saved for a future application, leave the static mixing nozzle mounted on the cartridge until that later date.
PAGE 4
ECOLOGY, HEALTH AND SAFETY Keep container tightly closed. Keep out of reach of children. Not for internal consumption. For industrial use only. For professional use only. For further information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Safety Data Sheets containing physical, ecological, toxicological and other safety related data. Read the current actual Safety Data Sheet before using the product.