Installation Guide

Residential
Sikacryl
®
PowerSet
Two component polyester gap ller
Description Sikacryl PowerSet is a specially formulated two-part polyester mortar designed to cure quickly for repair
of cementitious and masonry substrates.
Where to Use n Repointing Repairs on Masonry Structures
n Crack Filling
n Walkways, Sidewalks, Stairs, Decks, Patios, Walls, etc.
n Suitable for use as a ller repair material for small gaps occurring in typical cementitious mortar,
concrete, and masonry substrates.
Advantages n Fast Curing
n Easy to Install
n Excellent for Minor Repairs to Horizontal or Vertical
n Convenient Packaging
Coverage Each cartridge will yield approximately 9-1/2 linear feet (2.9 m) of mixed material when lling a typical 3/8
inch wide by 3/8 inch deep (10 mm x 10 mm) gap (e.g. mortar joint).
Packaging 10.1 . oz. (300 ml) + 2 static mixing nozzles
Carton containing 6 cartridges with 2 static mixing nozzles per cartridge.
Cure Mechanism Sikacryl PowerSet is a two component polyester formulation requiring a static mixing nozzle to combine
the ingredients for a reactive chemical cure.
Cartridge, Ambient and Substrate Temperature Gel Time* Cure Time
41°F to 50°F (5°C to 10°C) 12 mins 120 mins
51°F to 68°F (11°C to 20°C) 6 mins 80 mins
69°F to 77°F (21°C to 25°C) 4 mins 40 mins
78°F to 86°F (26°C to 30°C) 3 mins 30 mins
87°F to 95°F (31°C to 35°C) 2 mins 20 mins
96°F to 104°F (36°C to 40°C) 90 secs 15 mins
* Gel Time is the typical amount of time for mixed Sika PowerSet to solidify at highest
temperature in the range
Product Data Sheet
Edition 6.8.2016
Identication no. C370
Sikacryl
®
PowerSet
Typical Data [Material and curing conditions @ 68
o
F (20
o
C) and 50% R.H.]
RESULTS MAY DIFFER BASED UPON STATISTICAL VARIATIONS DEPENDING UPON MIXING METHODS AND EQUIPMENT,
TEMPERATURE, APPLICATION METHODS, TEST METHODS, ACTUAL SITE CONDITIONS AND CURING CONDITIONS.
Shelf Life 12 months in original, unopened packaging
Storage Conditions Cartridges standing upright in cool conditions, between 41
o
F to
77
o
F (5
o
C to 25
o
C) out of direct sunlight.
Product Conditioning Condition cartridges between 41
o
F to 77
o
F (5
o
C to 25
o
C) prior to use.
Color Mixed: Gray
‘A’ Component: Beige
‘B’ Component: Black
Density (mixed) (ASTM D 1875) 0.06 lb / in
3
(1.7 g / cm
3
)
Compressive Strength (ASTM D 695) 7,250 psi (50 MPa) at 4 hrs
8,700 psi (60 MPa) at 24 hrs
10,730 psi (74 MPa) at 7 days
PRIOR TO EACH USE OF ANY SIKA PRODUCT, THE USER MUST ALWAYS READ AND FOLLOW THE WARNINGS AND
INSTRUCTIONS ON THE PRODUCT’S MOST CURRENT PRODUCT DATA SHEET, PRODUCT LABEL AND SAFETY DATA
SHEET WHICH ARE AVAILABLE ONLINE AT HTTP://USA.SIKA.COM/ OR BY CALLING SIKA’S TECHNICAL SERVICE DE-
PARTMENT AT 800.933.7452 NOTHING CONTAINED IN ANY SIKA MATERIALS RELIEVES THE USER OF THE OBLIGATION
TO READ AND FOLLOW THE WARNINGS AND INSTRUCTIONS FOR EACH SIKA PRODUCT AS SET FORTH IN THE CUR-
RENT PRODUCT DATA SHEET, PRODUCT LABEL AND SAFETY DATA SHEET PRIOR TO PRODUCT USE.