SDS

Safety Data Sheet
SikaLatex® R
Rev
ision Date 11/15/2013 Print Date 11/18/2013
3 / 8
8. Exposure controls/personal protection
C
ontains no substances with occupational exposure limit values.
Engineering measures
: Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use
process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure below any
recommended or statutory limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk
assessment indicates this is necessary.
The filter class for the respirator must be suitable for the
maximum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling
the product. If this concentration is exceeded, self-contained
breathing apparatus must be used.
Hand protection
Remarks : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is
necessary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the
concentration and amount of dangerous substances, and to
the specific work-place.
Hygiene measures : Wash hands before breaks and immediately after handling the
product.
Remove contaminated clothing and protective equipment
before entering eating areas.
9. P
hysical and chemical pr
operties
A
ppearance
:
liquid
Color
:
whit
e
O
d
or :
ammoniacal
Odor Threshold : no data available
Flash point : > 212 °F (> 100 °C)
Ignition temperature : not applicable
Decomposition temperature : no data available