TDS

PRODUCT INFORMATION
Packaging
10.1 fl.oz. (299 ml)
Shelf Life
12 months from date of production
All Sika® AnchorFix-1 cartridges have the expiry date printed on the label.
Storage Conditions
Cartridges should be stored in their original packaging, the correct way up, in
cool conditions 41 °F to 77 °F (5 °C to 25 °C) out of direct sunlight.
TECHNICAL INFORMATION
Tensile Adhesion Strength
The above values represent mean ultimate values and allowable w orking loads. The allowable working loads
have been reduced using a safety factor of 4.0 for tension and 3.0 for shear, however, in some cases, such as
life safety, safety factors of 10.0 or higher may be necessary.
1.
Allowable loads must be checked against steel capacity. The lowest value controls.2.
Tabulated data is applicable to single anchors in normal weight concrete unaffected by edge or spacing re-
duction factors. V alues are valid for anchors installed into dry concrete in holes drilled with a hammer drill
and ANSI carbide drill bit.
3.
Service temperatures should remain approximately constant. The maximum long term temperature being
122 °F and the maximum short term temperature being 176 °F. Short term temperatures are those that oc-
cur over brief inte rvals, for example, diurnal cycling.
4.
Linear interpolation is allowed.5.
*The design professional on the job is ultimately responsible for the interpretation of the data provided above.
Service Temperature
Long Term 40 °F (4 °C) min. / 122 °F
(50 °C) max.
Short term (1–2 hours) 176 °F (80 °C)
(ETA 001, Part 5)
Product Data Sheet
Sika® AnchorFix-1
June 2018, Version 01.02
020205010010000001
2 /
8