TDS

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY

Mortar and concrete must be older than 28 days. Sub-

strate strength (concrete, masonry, natural stone) must

be verified. Pull-out tests must be carried out if the sub-

strate strength is unknown. The anchor hole must al-

ways be clean, dry, free from oil and grease etc. Loose

particles must be removed from the holes.

Threaded rods and rebars have to be cleaned thor-

oughly from any oil, grease or any other substances and

particles such as dirt etc.

MIXING

Getting the cartridge ready

1. Unscrew the cap

2. Cut the film

3. Screw on the static mix-

4. Place the cartridge into

the gun and start applica-

tion

When the work is interrupted the static mixer can re-

main on the cartridge after the gun pressure has been

relieved. If the resin has hardened in the nozzle when

work is resumed, a new nozzle must be attached.

Product Data Sheet

Sika® AnchorFix-2

November 2018, Version 01.03

020205010020000001

6 /