SDS

Material Safety Data Sheet
SikaBond Construction Adhesive
Revision Date 08/29/2013
Print Date 08/29/2013
3 / 8
6. Accidental release measures
Personal precautions Use personal protective equipment.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
No action shall be taken involving any personal risk without suitable
training.
Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
Material can create slippery conditions.
Environmental precautions Local authorities should be advised if significant spillages cannot be
contained.
Avoid dispersal of spilled material and runoff and contact with soil,
waterways, drains and sewers.
Methods for containment and
cleaning up
Contain spillage, soak up with non-combustible abso
rbent material,
(e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a
container for disposal according to local / national regulations (see
section 13).
Large spills should be collected mechanically (remove by pumping)
for disposal.
7. Handling and storage
Handling For personal protection see section 8.
Avoid inhalation, ingestion and contact with skin and eyes.
Smoking, eating and drinking should be prohibited in the application
area.
Storage Keep containers tightly closed in a dry, cool and well-ventilated
place.
Keep in properly labeled containers.
To maintain product quality, do not store in heat or direct sunlight.
Store in accordance with local regulations.
8. Exposure controls/personal protection
Exposure limit(s)
Component CAS Number Content % Basis * Value Exposure limit(s) /
Form of exposure
xylene 1330-20-7 1 -
5 ACGIH TWA 100 ppm
1 - 5 ACGIH
STEL 150 ppm
1 - 5 OSHA P1
TWA 100 ppm
435 mg/m3
1 - 5 OSHA P0 TWA 100 ppm
435 mg/m3
1 - 5 OSHA P0 STEL 1
50 ppm
655
mg/m3