Daim Ntawv Qhia Tus Neeg Siv

7
Camera Reset
1. Remove the camera on the software by clicking the minus button. If
you are accessing the camera from the Mobile Phone application click
on the “Device Management” icon on the top right hand corner. Your
camera will appear with the trash can icon next to it. Simply click on this
to remove it from the application.
2. Remove the Ethernet cable from the camera.
3. Ensure the power cable is inserted.
4. Press and hold the reset button that can be located under the rubber
cap on one of the leads attached to the Outdoor Camera until you hear a
faint click.
Once the reset has been completed you will be required to carry out the
initial setup for the camera (start from page 3).