Installation guide

4
Mac OS Installation
Follow the instructions below to install the USB
3.0 Gigabit Ethernet Adapter Pro driver.
Note: Do not connect the USB 3.0 Gigabit
Ethernet Adapter Pro to your computer
before instructed to do so.
1. Insert the driver CD, then double click
Drivers icon on desktop.
2. Select MAC folder, then double click
AX88179_178A.dmg.
3. For Mac 10.6 / 10.7: At the prompted
window, double click AX88179_178A_
v1.4.0pkg.
For Mac 10.8: Click AX88179 icon on
desktop, then double click AX88179_178A_
v1.4.0pkg.
4. At Introduction, click Continue.
5. At Installation Type, click Install.
6. Enter Name and Password, then click OK
or Install software, then click Continue
Installation.