User manual

VisualDepth for Visual Plus 310

5. Verify that the following screen appears indicating successful driver installation. Click

Finish to complete driver installation.

6. In some cases a window will come up asking to restart the computer. Save any unsaved

work and click Yes to restart the computer.

2.3 Install USB Serial Adapter

If your computer does not have a 9pin serial port and you will be using SIIG USB-Serial

adapter install the drivers as follows:

Windows XP/Server 2003

1. Make sure that the VisualPlus CD is inserted into your CD/DVD drive.

2. Plug in the USB to Serial adapter.

3. At the Found New Hardware Wizard: XP (w/SP1 or earlier)/Server 2003: continue to step

4; XP (w/SP2 or later)/Server 2003 (w/SP1 or later): select No, not this time, then click

Next.

4. Select Install the software automatically (Recommended), then click Next.