Installation guide

ManualsBrandsSIIG Manualscomputer componentsUSB 2.0 PCI Card

Low Profile USB 2.0

Quick Installation Guide

04-0205E

Features and Benefits

• Compliant with USB specifications revision 2.0

• Conforms to PCI specifications revision 2.2

• Supports simultaneous operation of multiple

high-speed USB 2.0 and USB 1.1 devices

• Supports high-speed (480 Mbps), full-speed (12

Mbps), and low-speed (1.5 Mbps) data transfer

modes

• User friendly hot-swapping feature allows you to

attach/remove USB devices without turning off

your system

Note: USB 1.1 devices are limited to USB 1.1 speeds

even when they are connected to USB 2.0 host adapter

or USB 2.0 hubs.

System Requirements

• Pentium-class computer with an available PCI slot

• Windows

2000 SP4 or later/XP SP1 or later/Server

2003/Vista

Dimensions

• PCB: 119.91 mm (L) x 64.41 mm (H)

• Bracket: 18.42 mm (W) x 79.20 MM (H)

Summary of content (8 pages)

PAGE 1
Low Profile USB 2.0 Quick Installation Guide Features and Benefits • • • • • Compliant with USB specifications revision 2.0 Conforms to PCI specifications revision 2.2 Supports simultaneous operation of multiple high-speed USB 2.0 and USB 1.1 devices Supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data transfer modes User friendly hot-swapping feature allows you to attach/remove USB devices without turning off your system Note: USB 1.1 devices are limited to USB 1.
PAGE 2
Package Contents • • Low Profile USB 2.0 Quick Installation Guide Layout Internal port External ports Figure 1: Layout Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system.
PAGE 3
. 4. 5. 6. Remove the slot bracket from an available PCI slot. Carefully align the card to the selected PCI slot, push the board down firmly, but gently, until it is well seated. Replace the slot bracket holding screw to secure the card. Replace the computer cover and reconnect the power cord. Driver Installation The Low Profile USB 2.0 has three built-in USB hosts. Two hosts handle USB 1.1 devices and the third host handles USB 2.0 devices. USB 1.1 and USB 2.
PAGE 4
Blank Page 4
PAGE 5
Blank Page 5
PAGE 6
Blank Page 6
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty.