Installation guide

Windows 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), then click Next.

3. Check Specify a location, uncheck the other boxes,

then click Next.

4. Insert the driver CD, type in D:\2000, then click OK.

(Change D: to match your CD-ROM drive letter)

5. Click Next and Finish.

6. Repeat steps 1-5 two more times.

7. Restart Windows to complete the installation.

To Verify Windows 2000 Installation

1. Right click My Computer, click Manage, then click

Device Manager.

2. Click on the + (plus sign) in front of Ports (COM &

LPT), CyberSerial 16Cxxx... should be displayed

two times.

3. Double click Multifunction adapters, SIIG

CyberPro 2S board should be displayed.

Windows ME

1. At the Add New Hardware Wizard, select Specify

the location of the driver (Advanced), then click

Next.

2. Insert the driver CD, check Specify a location,

uncheck the other box, type in D:\ME, then click

Next. (Change D: to match your CD/DVD-ROM

drive letter)

3. Click Next, then Finish.

4. Repeat steps 1 and 2.