Installation guide

Windows Server 2008 (32-/64-bit)

1. At the Found New Hardware Wizard, click Locate

and install driver software (recommended).

2. Insert the driver CD.

3. Click Don't search online.

4. Click I don't have the disc. Show me other options.

5. Click Browse my computer for driver software

(advanced).

6. Type D:, then click Next. (Change D: to match your

CD/DVD-ROM drive letter)

7. At The sofware for this device has been sucessfully

installed, click Close.

8. Repeat steps 3-7 to complete the installation.

To Verify Windows 7 / Vista / XP / Server 2003 &

2008 Installation

1. Check in Device Manager to verify installation.

For Windows 7: Right click Computer, click Manage,

then click Device Manager.

For Windows Vista: Right click Computer, click

Manage, click Continue, then click Device Manager.

For XP / Server 2003: Right click My Computer, click

Manage, then click Device Manager.

For Server 2008: Right click Computer, click Manage,

double click Diagnostics, then click Device

Manager.

2. Click on the + (plus sign) in front of Ports (COM &

LPT), CyberSerial 16Cxxx... should be displayed

two times.

3. Double click Multifunction adapters, SIIG

CyberPro 2S board should be displayed.