Installation guide

6 Right click Other PCI Bridge Device, click Update

Driver Software.

7. Repeat steps 3-5.

8. Right click CyberSerial Communication Port, click

Update Driver Software.

9. Click Browse my computer for driver software.

10. Type D:, click Next. (Change D: to match your CD/

DVD-ROM drive letter)

11. At Windows has successfully updated your driver

software, click Close.

12. Repeat steps 8-11 to complete the installation.

Windows Vista

™

(32-/64-bit)

1. At the Found New Hardware window, insert the

driver CD, click Locate and install driver software

(recommended), then click Continue.

2. Click Next, then click Close.

3. Repeat step 2 to complete the driver installation.

Note: Windows Vista driver installation process

may take several minutes to complete.

Windows XP / Server 2003 (32-/64-bit)

1. At the Found New Hardware Wizard, insert the

driver CD.

2. Select No, not this time, click Next. (Skip this step

if not prompted)

3. Select Install the software automatically

(Recommended), then click Next.

4. Click Finish.

5. Repeat steps 1-4 two more times.

6. Restart Windows to complete the installation.